Sortation and Systems Accessories

SORTATION
Model ProSort 131 & 221/231 High Speed Sortation Conveyor | Model SC Sortation Conveyor

Model ProSort 131 & 221/231 High Speed Sortation Conveyor

The Pro Sort is designed for high speed sorting of products. Products are transported on flight tubes where at a predetermined location, divert shoes move diagonally across the conveyor to physically push the product onto a take-away line.

ProSort 131 Shown
PROSORT 131:

Overall Widths: 24", 30", 36", & 42"
Bed-14" deep x 1-1/2", 10 & 12 ga. formed steel frame powder painted
Air Requirements-60 p.s.i.
Motor-230/460V-3Ph. 60HZ. HP based on speed and length requirements
Capacity-Maximum load 25 lbs. per foot. Maximum unit load 50 lbs.

PROSORT 221/231:

Overall Widths: 33", 39", 45", 51", & 57"
Bed-17"deep x 1-1/2", 10, & 12 ga. formed steel frame powder painted
Air Requirements-60 p.s.i.
Motor-230/460V-3Ph. 60HZ. HP based on speed and length requirements
Capacity-Maximum load 50 lbs. per foot. Maximum unit load 100 lbs.

Model SC High Speed Sortation Conveyor

The Model SC is designed to function as a belt driven sortation conveyor. The belt concept provides a reliable method of tracking packages to the divert stations. The diverter may be controlled by photo cells, a code reader, a PLC controller, or other established control methods.

Right or left hand diverts available (LH shown)
Sort Rates up to 50 times per minute
Overall Widths: 18", 24", 28" 30", & 34"
Bed-6-5/8" deep x 12 ga. formed steel frame powder painted
Rollers-1.9" dia. x 16 ga. rollers spaced every 6"
Lengths-9' - 13' (one diverter) to 29'9" - 51'9" (four diverters)
Motor-1 HP standard, 3 HP maximum
Belt Speed-150 constant fpm

Diverter Specifications

Diverter consists of four rows of 3-1/8" dia. wheels driven by urethane belts, slave driven from conveyor (pivoted pneumatically)
Capacity-Maximum unit package weight; 75 lbs.
Package Size-minimum 6" wide x 9" long to maximum 18" wide x 30" long
Air Requirements-60 p.s.i. minimum to 125 p.s.i. maximum

Spur Curve Switch

The Spur Curve Switch provides a simple method of diverting or converging products from one line to another. Normal flow is through curve. Transfer mechanism is raised to transfer straight through. Unit mounts on three stationary supports. Furnished with manual or pneumatic controls. Guard rails can be supplied.

45° & 90° curves available
Right and left hand units
Overall Widths-12", 15", 18", & 24"
Hand or air operated

Linear Thruster Package Stop

The Linear Thruster Package Stop is highly efficient and can be adapted to most any Hytrol powered roller or gravity conveyor.

Available in standard conveyor widths
Available in many capacities - contact your local Hytrol distributor.
Available with roller, blade or pin stop (pin style shown)
Solenoid Air Valve
Air Requirements-60 p.s.i. minimum & 80 p.s.i. maximum
2" High Stroke
Standard Position/normally down
Optional Position/normally up

Overhead Push-Off

The Overhead Push-Off provides high speed automatic product diversion. Product may be diverted 90° onto another conveyor, chute, etc., or changed from one lane to another in parallel lines. Overhead design conserves space next to conveyor.

Capacity-150 lbs. maximum package weight
Package height-Minimum 4-1/2" (20" stroke) or 6" (30" stroke), maximum is 24" high
Push-off can cycle up to 20 times per minute
Pusher Stroke-available in 20" or 30"
Pusher Face-18" long with 1.9" dia. roller
Air Requirements-60 p.s.i. minimum, 125 p.s.i. maximum

Powered Pivot Diverter

The Powered Pivot Diverter is designed for use with Models 138-ACC & 190-ACC accumulating conveyors. Products are automatically diverted onto adjacent 30° spur lines.

30° Spur Discharge
Minimum Elevation: 15" (138-ACC) or 16" (190-ACC)
Air Requirements-60 p.s.i. minimum; 125 p.s.i. maximum
Capacity-75 lbs. maximum package weight
Package size-minimum 6" wide x 9" long, maximum 18" wide x 30" long
Diverter Mechanism-consists of four rows of 3-1/8" dia. wheels with urethane treads driven by 3/8" dia. urethane belts
Cycles up to 40 times per minute
Drive is 1/2 HP motor with AC type variable speed controller
Unit mounts to 138-ACC (13" to 22" BR only) or 190-ACC (13" to 39" BR). Widths over 22" BR-contact factory.
Right or left hand diverters
Diverter Speed-from 42 to 420 FPM

High Speed Pusher

The High Speed Pusher provides high speed automatic product diversion. Product may be diverted 90° onto another conveyor, chute, etc. Special two-valve pneumatic control system provides smooth operation up to 45 cycles per minute. Cycle time varies with weight of product and stroke. The High Speed Pusher provides high speed automatic product diversion. Product may be diverted 90° onto another conveyor, chute, etc. Special two-valve pneumatic control system provides smooth operation up to 45 cycles per minute. Cycle time varies with weight of product and stroke.

High Speed Pusher

Medium Duty Pusher

Capacity-Light duty pusher; 75 lbs. maximum package weight, 400 lbs. for medium duty pusher
Stoke Length-Light duty pusher 14" to 18", 18" to 24", or 24" to 30" ranges; Medium duty pushers 10"-18", 18"-26", 26"-34", 34"-42", & 42"-50". Ranges may be adjusted for any length within each range
Push-Off Cycle-up to 45 times per minute. Cycle rate varies with package weight
Ram Face-12", 18", or 24" wide with 1" thick cushioned pad
Air Requirements-60 p.s.i. minimum, 125 p.s.i. maximum

CT-200

Chain Transfers are used to move products at right angles to adjacent or parallel conveyor lines. An air actuator lifts the transfer mechanism while powered chains transfer the product. Chains run on UHMW polyethylene wearstrips to reduce friction. Complete unit mounts in Models 190-ABEZ, 190-ACZ, or 190-LR.

Capacity-200 lbs.
Transfer Chain-#40 roller chain
Transfer Speed-65 FPM (other speeds available)
Air Requirements-60 p.s.i. minimum, 125 p.s.i. maximum